diff --git a/jacopad/arduino/README.md b/jacopad/arduino/README.md
deleted file mode 100644
index a49c909..0000000
--- a/jacopad/arduino/README.md
+++ /dev/null
@@ -1 +0,0 @@
-# JacoPad Arduino
diff --git a/jacopad/arduino/main.cpp b/jacopad/arduino/main.cpp
deleted file mode 100644
index 8830cfe..0000000
--- a/jacopad/arduino/main.cpp
+++ /dev/null
@@ -1,22 +0,0 @@
-#include <Arduino.h>
-
-#include "token.h"
-
-// Define array of limits for token j1
-float limits1[3] = {1000.0, 4000.0, 7500.0};
-
-// Create an instance of Token class named j1 with specified parameters
-Token j1(1, 15000, limits1, 400, 10000);
-
-void setup() {
-    Serial.begin(9600); // Initialize serial communication at 9600 baud rate
-}
-
-void loop() {
-    // Read the sensor value and print it along with the token type
-    Serial.print(j1.read());  // Print the adjusted sensor value
-    Serial.print("  ");       // Print separator
-    Serial.println(j1.type()); // Print the type of token based on the sensor value
-
-    delay(1000); // Delay for 1 second before next reading (adjust as needed)
-}
\ No newline at end of file
diff --git a/jacopad/arduino/token.cpp b/jacopad/arduino/token.cpp
deleted file mode 100644
index 1bc009f..0000000
--- a/jacopad/arduino/token.cpp
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <Arduino.h>
-
-#include "token.h"
-
-// Constructor for Token class
-Token::Token(int pin, float base, float limits[3], float min, float max) {
-    m_pin = pin;      // Initialize pin number
-    m_base = base;    // Set base value
-    m_min = min;      // Set minimum value
-    m_max = max;      // Set maximum value
-    for(int i=0; i<3; i++) {
-        m_limits[i] = limits[i];  // Copy limit values to class member array
-    }
-}
-
-// Read the analog value from the sensor and calculate the adjusted value
-float Token::read() {
-    float valeurLue = (float)analogRead(m_pin);  // Read analog value from specified pin
-    return (valeurLue * m_base) / (1023.0F - valeurLue);  // Perform scaling and return adjusted value
-}
-
-// Determine the type of token based on the read value
-int Token::type() {
-    float value = Token::read();  // Read the token value
-    if(value < m_min || m_max < value) {
-        return 0;  // Out of range, return type 0
-    }
-    for(int i=0; i<3; i++) {
-        if(value < m_limits[i]) {
-            return i + 1;  // Return type corresponding to the limit that value is less than
-        }
-    }
-    return 4;  // Default type (in range but not matching any specific limit)
-}
\ No newline at end of file
diff --git a/jacopad/arduino/token.h b/jacopad/arduino/token.h
deleted file mode 100644
index 3ca611d..0000000
--- a/jacopad/arduino/token.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#pragma once
-
-// Token class declaration
-class Token {
-private:
-    int m_pin;            // Pin number connected to the sensor
-    float m_base;         // Base value used for scaling the sensor reading
-    float m_limits[3];    // Array of limit values for token type determination
-    float m_min;          // Minimum value threshold for token range
-    float m_max;          // Maximum value threshold for token range
-
-public:
-    // Constructor declaration
-    Token(int pin, float base, float limits[3], float min, float max);
-
-    // Method to read sensor value and return adjusted value
-    float read();
-
-    // Method to determine and return the type of token based on the sensor value
-    int type();
-};
\ No newline at end of file